Technyl C 548 B
O tem materialu
TECHNYL C 548B Black is an unreinforced polyamide 6, high viscosity, for extrusion blow-moulding. This grade offers a good processing behaviour, high impact resistance even at low temperature and high barrier properties especially to fluids such as fuels and oils, as well as a high toughness.
Typical use for Automotive industry for air ducts.
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialTechnyl C 548 B
Technical properties
| Density (g/cm³) | 1.07 |
| Flow Rate (g/10 min) | - |
| Flame Rating | HB(1.5 mm) |
| Notched Izod Impact Strength (kJ/m²) | 90(23°C, Type 1, Notch A) |
| Notched Izod Impact (J/m) | - |
