Noryl NHP6012
Over dit product
NORYL NHP6012 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a CTI 2 and UL94 flame rating of V0 at 1.5mm for thin-wall molding capability. NORYL NHP6012 is based on a unique co-polymer technology and exhibits high flow, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. This material is an excellent candidate for appliance internals, indoor and outdoor electrical and electrical vehicle (EV) battery modules/housings.
Merk: NorylProducent: Sabic High Performance Plastics (SHPP)Polymeertype: PPEVulstof: 10% Glass FiberForm: Unknown
Kenmerken
Markten
Technologieën
Specificaties
Geen specificaties gevonden voor dit product
Offerte aanvragen
Technical properties
| Density (g/cm³) | 1.19 1.19 |
| Flow Rate (g/10 min) | - |
| Flame Rating | V-1(> 1.0 mm) V-0(> 1.5 mm) 5VB(> 2.5 mm) 5VA(> 2.5 mm) |
| Notched Izod Impact Strength (kJ/m²) | 6.0(23°C, Type 1, Notch A) 6.0(-30°C, Type 1, Notch A) |
| Notched Izod Impact (J/m) | 60(-30°C) 70(23°C) |
