Purell HP570P
O tem materialu
Purell HP570P is a polypropylene homopolymer for use in injection moulding applications
Purell HP570P exhibits a good flow properties combined with a high stiffness. It can also be sterilised by autoclave and ethylene oxide methods.
Purell HP570P is extensively applied in medical device components, labware and closures. Additionally it is used in general injection moulding thin-walled warpage-critical applications.
Blagovna znamka: PurellProizvajalec: LYB LyondellBasellTip polimera: PP HOMOPolnilo: Brez polnilaOblika: Granules
Značilnosti
Biocompatible
Flow, Good
Flow, Medium
Homopolymer
Sterilizable, Autoclave
Sterilizable, Ethylene Oxide
Stiffness, High
Stiffness, Medium
Warpage, Low
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialPurell HP570P
Technical properties
| Density (g/cm³) | 0.900 ISO 1183 |
| Flow Rate (g/10 min) | 16(230°C/2.16 kg) ISO 1133 |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
