Technyl SAFE A 219WFC V50
O tem materialu
*Previously TECHNYL A 218W V50 BLACK FA
TECHNYL SAFE A 219WFC V50 BK is a polyamide 66, 50% glass fibre reinforced, heat stabilized with organic stabiliser for injection moulding. Designed to offer an improved hydrolisis resistance and chlorine resistance vs standard PA66, for cold, warm and hot temperature in domestic and industrial water management components including, but not limited to components in contact with drinking water where elevated levels of chlorine could be present.
Blagovna znamka: Technyl SAFEProizvajalec: DomoTip polimera: PA66Polnilo: 50% Glass FiberOblika: Granules
Značilnosti
Dimensional Stability, Good
Drinking Water Contact Acceptable
Food Contact Acceptable
Heat Stabilized
Hydrolysis Resistant
Hydrolytically Stable
Stiffness, High
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialTechnyl SAFE A 219WFC V50
Technical properties
| Density (g/cm³) | 1.55 ISO 1183 |
| Flow Rate (g/10 min) | - |
| Flame Rating | HB(0.75 mm) UL 94 HB(1.5 mm) HB(3.0 mm) |
| Notched Izod Impact Strength (kJ/m²) | 14(23°C, Type 1, Notch A) ISO 180 |
| Notched Izod Impact (J/m) | - |
