Technyl A 216 MT30 BK
O tem materialu
TECHNYL C 216 MT30 NC is a polyamide 6, reinforced with 30% of mineral filler, for injection moulding. The isotropic shrinkage and the good dimensional stability make it adequate for every kind of application in which the planarity of the part is important.
Značilnosti
Dimensional Stability, Good
Warpage, Low
Trgi
Za ta izdelek ni na voljo nobenih trgov.
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialTechnyl A 216 MT30 BK
Technical properties
| Density (g/cm³) | 1.36 ISO 1183 |
| Flow Rate (g/10 min) | - |
| Flame Rating | HB(0.75 mm) UL 94 |
| Notched Izod Impact Strength (kJ/m²) | 5.0(23°C, Type 1, Notch A) ISO 180 |
| Notched Izod Impact (J/m) | - |
