Duracon SW-01
O tem materialu
Duracon SW-01 is an acetal co-polymer suitable for injection moulding (MFR 7 ) that is lubricated for improved sliding properties. The material contains added PE with 10% calcium carbonate.
Features:
- Natural CF2001 or Black CD3501
- Suitable for contact parts exposed to high load - low speed
- High strength, high contact pressure applications
- Low VOC emission (LV) grade available
Blagovna znamka: DuraconProizvajalec: PolyplasticsTip polimera: POM COPOPolnilo: 10% Calcium CarbonateOblika: Granules
Značilnosti
Alkali Resistant
Creep Resistant
Dimensional Stability, Good
Flow, Medium
Friction, Low
Fuel Resistant
Lubricated
Strength, High
Wear Resistant
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialDuracon SW-01
Technical properties
| Density (g/cm³) | 1.42 ISO 1183 |
| Flow Rate (g/10 min) | 7.0(190°C/2.16 kg) ISO 1133 |
| Flame Rating | HB UL 94 |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
