Ultrason E2010 G6
O tem materialu
Ultrason E 2010 G6 is a 30% glass reinforced, medium viscosity injection molding PESU grade with high rigidity and strength.
Applications
Typical applications include circuit braker parts, lamp holders, heat shields, impellers, and printer cartridges.
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialUltrason E2010 G6
Technical properties
| Density (g/cm³) | 1.59 |
| Flow Rate (g/10 min) | - |
| Flame Rating | V-0(1.6 mm) V-0(3.0 mm) |
| Notched Izod Impact Strength (kJ/m²) | 9.5(-30°C) 10(23°C) |
| Notched Izod Impact (J/m) | - |
