Ultrason E2010
O tem materialu
Ultrason E 2010 is an unreinforced, medium viscosity standard injection molding PESU grade. Ultrason E 2010 Natural flows readily and offers outstanding heat resistance and dimensional stability.
Applications
Typical applications include automotive applications such as fuse encapsulation, connectors, heating system and headlight components and household applications such as microwave dishes and other applications requiring high heat resistance.
Available in natural and BK Q31 10088
Značilnosti
Dimensional Stability, Good
Flow, Good
Food Contact Acceptable
Heat Resistance, High
Viscosity, Medium
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialUltrason E2010
Technical properties
| Density (g/cm³) | 1.37 ISO 1183 |
| Flow Rate (g/10 min) | - |
| Flame Rating | V-0(1.6 mm) UL 94 V-0(3.0 mm) |
| Notched Izod Impact Strength (kJ/m²) | 7.0(23°C) ISO 180 7.5(-30°C) |
| Notched Izod Impact (J/m) | - |
