Ultramid® T KR 4355 G5
O tem materialu
Ultramid T KR 4355 G5 is a 25% glass fiber reinforced injection molding PA6/6T grade featuring high toughness, stiffness, and strength, low water absorption, and high melting point (295 C). After the material has been conditioned, its mechanical properties remain stable up to 65 C.
Available in natural and BK564
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialUltramid® T KR 4355 G5
Technical properties
| Density (g/cm³) | 1.35 |
| Flow Rate (g/10 min) | - |
| Flame Rating | HB(0.44 mm) HB(0.75 mm) HB(1.5 mm) HB(3.0 mm) |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
