Trirex 3025IR
O tem materialu
MFR 10 Polycarbonate with mould release
-Material is fully transparent with a bluish edge tint.
-V2 flame rated @ 1.5mm
-This grade does NOT contain a UV stabiliser.
Značilnosti
Dimensional Stability, Good
Electrical Properties, Good
Low Temperature Impact Resistance
Moisture Absorption, Low
Viscosity, Medium
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialTrirex 3025IR
Technical properties
| Density (g/cm³) | 1.20 ASTM D792 |
| Flow Rate (g/10 min) | 10(300°C/1.2 kg) ASTM D1238 |
| Flame Rating | V-2(1.6 mm) UL 94 |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | 880(23°C, 3.18 mm) ASTM D256 |
