Sumipex MH
O tem materialu
Sumipex MH is a PMMA (MFR 2) suitable for injection and extrusion. The material is heat resistant, available in pellet form.
-Sumipex MH is produced in Singapore
-Suitable for demanding applications & segments including Automotive and Lighting
-UL 746C F1 rated
NOTE: for extrusion applications, Sumitomo MH is available from Saudi, suitable for general extrusion sheets/profiles and should be considered first for such applications.
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialSumipex MH
Technical properties
| Density (g/cm³) | 1.19 |
| Flow Rate (g/10 min) | 2.0(230°C/3.8 kg) |
| Flame Rating | HB(1.6 mm) |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
