Moplen HP548N
O tem materialu
Moplen HP548N is a polypropylene homopolymer, MFR 11, with medium melt flow rate, used in injection molding applications. Moplen HP548N exhibits good stiffness and flowability. It is nucleated, for improved productivity and lower cycle times. Its antistatic additivation ease demolding and prevents dust deposits. Typical applications of Moplen HP548N are caps, closures, containers and housewares.
Blagovna znamka: MoplenProizvajalec: LYB LyondellBasellTip polimera: PP HOMOPolnilo: Brez polnilaOblika: Granules
Značilnosti
Antistatic
Fast Molding Cycle
Flow, Good
Flow, Medium
Homopolymer
Nucleated
Stiffness, High
Stiffness, Medium
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialMoplen HP548N
Technical properties
| Density (g/cm³) | 0.900 ISO 1183 |
| Flow Rate (g/10 min) | 11(230°C/2.16 kg) ISO 1133 |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
