Moplen HP483R
O tem materialu
Moplen HP483R is a polypropylene homopolymer with medium high melt flow rate, MFR 27, for usage in injection molding applications. Moplen HP483R contains antistatic and slip agents, for easier demolding and low friction. It exhibits a good stiffness combined with a good dimensional stability. Moplen HP483R is used in caps, closures and thin wall injection molding applications.
Blagovna znamka: MoplenProizvajalec: LYB LyondellBasellTip polimera: PP HOMOPolnilo: Brez polnilaOblika: Granules
Značilnosti
Antistatic
Dimensional Stability, Good
Flow, Medium
Friction, Low
Homopolymer
Mold Release, Good
Slip
Stiffness, High
Stiffness, Medium
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialMoplen HP483R
Technical properties
| Density (g/cm³) | 0.900 ISO 1183 |
| Flow Rate (g/10 min) | 27(230°C/2.16 kg) ISO 1133 |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
