Moplen EP445L
O tem materialu
Moplen EP445L is a polypropylene impact copolymer with medium melt flow rate, MFR 6, suitable for compression and injection molding processes. Moplen EP445L exhibits a good stiffness and impact strength balance, high stress cracking resistance and low stress whitening behaviour. Moplen EP445L is nucleated, for faster crystallization rate and increased productivity. It contains both slip and antistatic additives, for easier demolding and low coefficient of friction. Moplen EP445L is typically used in caps and closures. Other typical applications are in the field of housewares, toys and rigid packaging.
Blagovna znamka: MoplenProizvajalec: LYB LyondellBasellTip polimera: PP COPOPolnilo: Brez polnilaOblika: Granules
Značilnosti
Antiblock
ESCR (Stress Crack Resist.), High
Fast Molding Cycle
Flow, Medium
Friction, Low
Impact Copolymer
Impact Resistance, Medium
Mold Release, Good
Nucleated
Slip
Stiffness, High
Stiffness, Medium
Stress Whitening Resistant
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialMoplen EP445L
Technical properties
| Density (g/cm³) | 0.900 ISO 1183 |
| Flow Rate (g/10 min) | 6.0(230°C/2.16 kg) ISO 1133 |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
