Koattro PBM 1200M
O tem materialu
Polybutene-1 grade Koattro PB M 1200M is a random copolymer of butene-1 with low ethylene content.
Koattro PB M 1200M is primarily used as a blend component in hot melt adhesive (HMA) formulations and sealant compounds. It provides good cohesive strength of the HMA, higher Shear Adhesion Failure Temperature (SAFT) and can be used in combination with a wide variety of non-polar resins and waxes. It offers high green strength in assembly applications and helps to reduce the amount of resin needed in a HMA formulation.
Koattro PB M 1200M is used in carpet backing applications (Primary and Secondary backing), where it offers flexibility, high filler loading capability, recyclability and energy saving potential.
It is also used as an adhesive layer in multilayer meltblown applications. It is highly compatible with polypropylene.
Blagovna znamka: KoattroProizvajalec: LYB LyondellBasellTip polimera: PBPolnilo: Brez polnilaOblika: Granules
Značilnosti
Chemical Resistant
Creep Resistant
ESCR (Stress Crack Resist.), High
Flow, High
Random Copolymer
Stiffness, Medium
Thermal Stability, Good
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialKoattro PBM 1200M
Technical properties
| Density (g/cm³) | 0.908 ISO 1183 |
| Flow Rate (g/10 min) | 1200(190°C/2.16 kg) ISO 1133 |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
