Eltex MMPE3940/10FDA
O tem materialu
High Density Polyethylene - Milk blow moulding resin
ELTEX ® MMPE3940/10FDA is a masterbatch pigmented with carbon black and manufactured from ELTEX ® high-density polyethylene base.
It is mainly used for the pigmentation of the middle layer of high density polyethylene co-extruded bottles intended for the packaging of UHT or sterilized milk.
It complies with the main European and U.S. food regulations governing the packaging of food products on condition however it is used at less than 5 %.
Blagovna znamka: EltexProizvajalec: INEOS Olefins & PolymersTip polimera: HDPEPolnilo: Brez polnilaOblika: Unknown
Značilnosti
Trgi
Tehnologije
Za ta material ni na voljo nobenih tehnologij.
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialEltex MMPE3940/10FDA
Technical properties
| Gostota (g/cm³) | 1.50 |
| Hitrost pretoka taline (g/10 min) | 5.0(190°C/10.0 kg) |
| Razred gorljivosti | - |
| Notched Izod Impct ASTM 256 (J/m) | - |
| Notched Izod Impct ISO 180 (kJ/m²) | - |
