Ultramid® T KR 4357 G6
O tem materialu
Ultramid T KR 4357 is a 30% glass fiber reinforced, impact-modified, injection-molding PA6/6T grade. High toughness, stiffness and strength, low water absorption. High melting point (295 C). After the material has been conditioned, its mechanical properties remain stable up to 60 C.
Značilnosti
Trgi
Za ta izdelek ni na voljo nobenih trgov.
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialUltramid® T KR 4357 G6
Technical properties
| Density (g/cm³) | 1.37 |
| Flow Rate (g/10 min) | - |
| Flame Rating | HB(0.75 mm) HB(1.5 mm) HB(3.0 mm) |
| Notched Izod Impact Strength (kJ/m²) | 23(23°C) |
| Notched Izod Impact (J/m) | - |
