Eltex MMPE3940/10FDA
Over dit product
High Density Polyethylene - Milk blow moulding resin
ELTEX ® MMPE3940/10FDA is a masterbatch pigmented with carbon black and manufactured from ELTEX ® high-density polyethylene base.
It is mainly used for the pigmentation of the middle layer of high density polyethylene co-extruded bottles intended for the packaging of UHT or sterilized milk.
It complies with the main European and U.S. food regulations governing the packaging of food products on condition however it is used at less than 5 %.
Kenmerken
Carbon Black
Density, High
Food Contact Acceptable
Narrow Molecular Weight Distribution
Markten
Technologieën
No technologies available for this product.
Specificaties
Geen specificaties gevonden voor dit product
Offerte aanvragen
Log in om uw offertes en afroeporders te bekijken.
Selecteer de kleur
ProductEltex MMPE3940/10FDA
Technical properties
| Density (g/cm³) | 1.50 ISO 1183 |
| Flow Rate (g/10 min) | 5.0(190°C/10.0 kg) ISO 1133 |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
