
High Density Polyethylene - Milk blow moulding resin
ELTEX ® MMPE3940/10FDA is a masterbatch pigmented with carbon black and manufactured from ELTEX ® high-density polyethylene base.
It is mainly used for the pigmentation of the middle layer of high density polyethylene co-extruded bottles intended for the packaging of UHT or sterilized milk.
It complies with the main European and U.S. food regulations governing the packaging of food products on condition however it is used at less than 5 %.
Aucune technologie n'est disponible pour ce produit.
Aucune spécification est indiquée pour ce produit
| Densité (g/cm³) | 1.50 |
| Fluidité (g/10 min) | 5.0(190°C/10.0 kg) |
| Indice d'inflammabilité | - |
| Impact Izod entaillé ASTM 256 (J/m) | - |
| Impact Izod entaillé ISO 180 (kJ/m²) | - |
Gerard Mercatorstraat 90
3920 Lommel
Belgium
