Noryl NHP7020T3
About this product
NORYL NHP7020T3 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for ultra-thin-wall FR. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries UL94 flame rating of V0 at 0.3mm. NORYL NHP7020T3 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and low specific gravity. This grade is targeted for electrical vehicle (EV) battery modules, bus bar insulation layer and other high voltage electric component. See NHP8010VT3 resin for higher heat version.
Brand: NorylProducer: Sabic High Performance Plastics (SHPP)Polymer Type: PPEFiller: UnfilledForm: Unknown
Features
Amorphous
Bromine Free
Chlorine Free
Density, Low
Dimensional Stability, Good
Flame Retardant
Halogen Free
Heat Stabilized
Hydrolytically Stable
Impact Resistance, Good
Moisture Absorption, Low
Processability, Good
Shrinkage, Low
Warpage, Low
Markets
Technologies
Specifications
No specifications are listed for this product
Request Quote
Technical properties
| Density (g/cm³) | 1.09 ISO 1183 |
| Flow Rate (g/10 min) | 26(300°C/5.0 kg) ASTM D1238 |
| Flame Rating | V-0(> 0.30 mm) UL 94 |
| Notched Izod Impact Strength (kJ/m²) | 11(-30°C, Type 1, Notch A) ISO 180 38(23°C, Type 1, Notch A) |
| Notched Izod Impact (J/m) | 100(-30°C) ASTM D256 380(23°C) |
