Noryl NHP6012
About this product
NORYL NHP6012 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a CTI 2 and UL94 flame rating of V0 at 1.5mm for thin-wall molding capability. NORYL NHP6012 is based on a unique co-polymer technology and exhibits high flow, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. This material is an excellent candidate for appliance internals, indoor and outdoor electrical and electrical vehicle (EV) battery modules/housings.
Brand: NorylProducer: Sabic High Performance Plastics (SHPP)Polymer Type: PPEFiller: 10% Glass FiberForm: Unknown
Features
Amorphous
Bromine Free
Chlorine Free
Density, Low
Dimensional Stability, Good
Flame Retardant
Flow, High
Halogen Free
Heat Resistance, High
Hydrolytically Stable
Moisture Absorption, Low
Shrinkage, Low
Stiffness, High
Strength, High
Warpage, Low
Markets
Technologies
Specifications
No specifications are listed for this product
Request Quote
Technical properties
| Density (g/cm³) | 1.19 ASTM D792 1.19 ISO 1183 |
| Flow Rate (g/10 min) | - |
| Flame Rating | V-1(> 1.0 mm) UL 94 V-0(> 1.5 mm) 5VB(> 2.5 mm) 5VA(> 2.5 mm) |
| Notched Izod Impact Strength (kJ/m²) | 6.0(23°C, Type 1, Notch A) ISO 180 6.0(-30°C, Type 1, Notch A) |
| Notched Izod Impact (J/m) | 60(-30°C) ASTM D256 70(23°C) |
