Ultrapolymers
Produtos
Tecnologias
Mercados
Serviços
Aprender connosco
Sustainability
Porquê registar-se?

Produtos
Tecnologias
Mercados
Serviços
Aprender connosco
Sustainability
Porquê registar-se?

Portugal / Português
A minha conta

Ensoft
Início

Ensoft

Informações sobre a marca

TPE ENSOFT® (TPE-S)

Ravago produces a wide range of different thermoplastic elastomer grades.

TPE-S, TPE-V and TPE-O, under the brand names Enflex® and Ensoft®, are produced by Ravago’s factory Enplast Turkey and TPE-S, with the brand name Sconablend®, is produced at Ravago Plastics Germany.

Thermoplastic elastomers are a unique class of materials that combine the key processing and recycling properties of thermoplastics with many of the physical properties of thermoset rubbers such as elasticity, low compression set and high flexibility.

Ensoft® TPE-S:
Ensoft® TPE-S consists of styrene-diene copolymers. The unsaturated butadiene styrene (SBS) copolymers are of the lower cost and performance members of this group whereas hydrogenated/saturated styrene-ethyl-butyl-styrene (SEBS) and styrene ethyl-ethyl-propyl-styrene (SEEPS) are the higher cost high performance members. Compounds of these copolymers incorporate suitable thermoplastics (such as PP, PE, PS), oil and fillers in a co-continuous phase morphology.

Ensoft® TPE-S offers:

  • Hardness range from 5 Shore A to 60 Shore D (SBS 30 Shore A to 45 Shore D)
  • Service Temperature: -50 to +110°C (dynamic; SBS -50°C to +70°C) -50 to +130°C (Static/Peak; SBS -50 to +110°C)
  • Excellent ozone, UV and weather resistance due to saturated elastomeric phase; SBS has moderate UV, ozone and weathering resistance due to the presence of double bond
  • Chemical resistance to many aggressive mediums
  • Low compression set and good elasticity in a wide temperature range
  • Adhesion to a broad range of polar and non-polar substrates such as PP, PA, ABS, PC, PS…
  • Broad product range including soft touch, expandable, high temperature resistant, low compression set, halogen free FR and many other specialty grades
  • Ease of processing (no pre-drying is required) and recyclability
Produtores: EnplastGrupo de polímeros: TPEGrupo/tipo(s) de polímero: TPE(unspecified) • TPS

Disponível em

Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, North Macedonia, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Spain, Sweden, Switzerland, Ukraine, United Kingdom, Kosovo, Slovenija, Kazakhstan, South Africa

Ensoft produtos

176 produto(s) encontrado(s) em Ensoft
Ensoft SD-300-90A-T2-900Enplast
TPE Extrusão (não definida), Folha de Extrusão, Extrusão de perfis, Extrusão de Chapa.
Heat Stabilized
UV Stabilized
Ozone Resistant
+5
Ensoft SD-641-90AEnplast
TPE Extrusão (não definida), Folha de Extrusão, Extrusão de perfis, Extrusão de Chapa.
UV Resistant
Chemical Resistant
Heat Stabilized
+3
Ensoft SL-660-90A-T2-900Enplast
TPE Extrusão de Chapa. , Extrusão (não definida), Extrusão de perfis
Abrasion Resistant
Scratch Resistance, Good
Odor, Low
+4
Ensoft SX-141-50A-T2-000-FCAEnplast
TPE Moldagem por Injeção, Multi Moldagem por Injeção
Chemical Resistant
Flow, High
Heat Stabilized
+3
Ensoft SO-141-35AEnplast
TPE Moldagem por Injeção, Multi Moldagem por Injeção
Heat Aging Resistant
Ozone Resistant
Recyclable Material
+5
Ensoft SL-620-40A-D2-900Enplast
TPE Extrusão de perfis, Extrusão (não definida), Extrusão de Chapa.
Chemical Resistant
UV Stabilized
Recyclable Material
Ensoft SD-151-80AEnplast
TPE Extrusão (não definida), Folha de Extrusão, Extrusão de perfis, Extrusão de Chapa.
Heat Stabilized
Ozone Resistant
UV Stabilized
+2
Ensoft SD-161-80AEnplast
TPE Extrusão (não definida), Extrusão de perfis, Folha de Extrusão, Extrusão de Chapa.
Heat Stabilized
Ozone Resistant
UV Stabilized
+2
Ensoft SL-674-90AEnplast
TPE Extrusão (não definida), Extrusão de perfis, Folha de Extrusão, Extrusão de Chapa.
Chemical Resistant
Heat Stabilized
Ozone Resistant
+2
Ensoft SO-160-55AEnplast
TPE Moldagem por Injeção, Extrusão (não definida)
Heat Stabilized
Ozone Resistant
UV Stabilized
+3
Ensoft SO-160-70AEnplast
TPE Moldagem por Injeção, Multi Moldagem por Injeção
Heat Stabilized
Ozone Resistant
UV Stabilized
+3
Ensoft SO-160-90AEnplast
TPE Moldagem por Injeção, Multi Moldagem por Injeção
Heat Stabilized
Ozone Resistant
UV Stabilized
+3
...
...

Documents

0
0 documentos encontrados

Pedir um orçamento

produtos
Cor
Embalagem
Quantidade
kg
Ultrapolymers
Information
ProdutosEmpresaMercadosTecnologiasContato
Helpful Links
ServiçosTermos de utilizaçãoPolítica de PrivacidadePolítica de cookiesPreferências de cookies
Ultrapolymers Portugal S.A.
+351 (244) 545 540

Zona Industrial Do Casal da Lebre Rua Da Austria 13 

2430-028 Marinha Grande 

Portugal

ask.pt@ultrapolymers.com

Ravago
Ravago
Ravago
Ultrapolymers. Todos os direitos reservados. Membro do Grupo Ravago