Ultem AUT200AR - Europe
Over dit product
High flow Polyetherimide (Tg 217°C) with low level of transparent mold release. Very low outgassing and plateout for optimally reduced need for mold cleaning. May be beneficial for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204°C (SABIC IP method).
ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.
Merk: UltemProducent: Sabic High Performance Plastics (SHPP)Polymeertype: PEIVulstof: OngevuldForm: Unknown
Kenmerken
Amorphous
Chemical Resistant
Creep Resistant
Dimensional Stability, Good
Flow, High
Heat Resistance, High
Hydrolytically Stable
Mold Release, Good
Renewable Resource Content
Stiffness, High
Strength, High
Surface Finish, Good
Warpage, Low
Markten
Technologieën
Specificaties
Geen specificaties gevonden voor dit product
Offerte aanvragen
Log in om uw offertes en afroeporders te bekijken.
Selecteer de kleur
ProductUltem AUT200AR - Europe
Technical properties
| Density (g/cm³) | 1.27 ISO 1183 |
| Flow Rate (g/10 min) | - |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | 5.0(23°C, Type 1, Notch A) ISO 180 5.0(-30°C, Type 1, Notch A) |
| Notched Izod Impact (J/m) | - |
