Noryl NHP6011
Over dit product
NORYL NHP6011 resin is a blend of polyphenylene ether (PPE) with glass fiber. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a CTI 2 and UL94 flame rating of V0 at 1.5mm for thin-wall molding capability. NORYL NHP6011 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. This material is an excellent candidate for electrical vehicle (EV) battery modules/housings.
Merk: NorylProducent: Sabic High Performance Plastics (SHPP)Polymeertype: PPEVulstof: 8% Glass FiberForm: Unknown
Kenmerken
Amorphous
Bromine Free
Chlorine Free
Density, Low
Dimensional Stability, Good
Flame Retardant
Halogen Free
Heat Resistance, High
Hydrolytically Stable
Moisture Absorption, Low
Shrinkage, Low
Stiffness, High
Strength, High
Warpage, Low
Markten
Technologieën
Specificaties
Geen specificaties gevonden voor dit product
Offerte aanvragen
Technical properties
| Density (g/cm³) | 1.16 ASTM D792 1.16 ISO 1183 |
| Flow Rate (g/10 min) | - |
| Flame Rating | V-0(> 1.5 mm) UL 94 5VB(> 1.5 mm) |
| Notched Izod Impact Strength (kJ/m²) | 6.0(-30°C, Type 1, Notch A) ISO 180 10(23°C, Type 1, Notch A) |
| Notched Izod Impact (J/m) | 75(-30°C) ASTM D256 100(23°C) |
