Ultem AUT200M - Europe
Over dit product
High flow Polyetherimide (Tg 217C) with internal mold release.. Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective
surfaces are required. Haze onset temperature of 204C (SABIC IP method).
Merk: UltemProducent: Sabic High Performance Plastics (SHPP)Polymeertype: PEIVulstof: OngevuldForm: Unknown
Kenmerken
Amorphous
Chemical Resistant
Creep Resistant
Dimensional Stability, Good
Flow, High
Heat Resistance, High
Hydrolytically Stable
Mold Release, Good
Platable
Renewable Resource Content
Shrinkage, Low
Stiffness, High
Strength, High
Markten
Technologieën
Specificaties
Geen specificaties gevonden voor dit product
Offerte aanvragen
Log in om uw offertes en afroeporders te bekijken.
Selecteer de kleur
ProductUltem AUT200M - Europe
Technical properties
| Density (g/cm³) | 1.27 ISO 1183 |
| Flow Rate (g/10 min) | - |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | 5.0(23°C, Type 1, Notch A) ISO 180 5.0(-30°C, Type 1, Notch A) |
| Notched Izod Impact (J/m) | - |
