Duracon M90-57
À propos de ce produit
Duracon M90-57 is a medium viscosity (MFR 9) POM Co-polymer for general injection moulding.
- 57 series suitable for food & potable water applications.
- WRAS up to 85C
- Available in natural WK2001
- 57 series are 'new' generation materials which requires less stabilisers during manufacture (allowing food compliance and lower emissions)
NOTE: If customer is self-colouring using acid based pigments -44 series may be more suitable than -57 series (-44 series uses more stabilisers)
Marque commerciale: DuraconProducteur: PolyplasticsType de polymère: POM COPOCharges: Non remplieFormulaire: Granules
Caractéristiques
Copolymer
Creep Resistant
Dimensional Stability, Good
Drinking Water Contact Acceptable
Fatigue Resistant
Food Contact Acceptable
Friction, Low
Fuel Resistant
Wear Resistant
Marchés
Technologies
Spécifications
Aucune spécification est indiquée pour ce produit
Demande de devis
Pour consulter vos devis et vos commandes ouvertes, veuillez vous connecter.
Sélectionner la couleur
ProduitDuracon M90-57
Technical properties
| Density (g/cm³) | 1.41 ISO 1183 |
| Flow Rate (g/10 min) | 9.0(190°C/2.16 kg) ISO 1133 |
| Flame Rating | HB UL 94 |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
