Moplen HP456J is used in extrusion and thermoforming applications with an MFI of 3,4. It is formulated with a low water-carry-over additive package. Typical applications are monofilaments, ropes and tapes and thermoforming in rigid packaging.
Не са посочени спецификации за този продукт
| Плътност (g/cm³) | 0.900 |
| Течливост (g/10 min) | 3.4(230°C/2.16 kg) |
| Оценка на пламъка | - |
| Ударна якост по Izod с прорез ASTM 256 (J/m) | - |
| Ударна якост по Izod с прорез ISO 180 (kJ/m²) | - |
12, Obelsko Shosse str. Orkikem Building
1360 Sofia
Bulgaria
