Marlex 9018
За този продукт
This high density polyethylene is an ethylene-hexene copolymer that is tailored for injection molded applications that require:
- Good flow
- Good impact strength
- Good stiffness
- Durability
Typical injection molded applications for 9018 include:
- Pails (one- and two-gallon)
- Automotive applications
- Toys
- Tamper-evident caps for milk bottles
- Small containers for building compounds
- Housewares
This resin meets these specifications:
- ASTM D4976 - PE 232
- FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)
Характеристики
Copolymer
Density, High
Durable
Flow, Good
Food Contact Acceptable
Hexene Comonomer
Impact Resistance, Good
Recyclable Material
Stiffness, High
Пазари
Технологии
Спецификации
Не са посочени спецификации за този продукт
Заявка за оферта
За да видите вашите оферти и поръчки "при поискване", моля, влезте в системата.
Изберете цвят
ProductMarlex 9018
Technical properties
| Density (g/cm³) | 0.952 ASTM D1505 |
| Flow Rate (g/10 min) | 20(190°C/2.16 kg) ASTM D1238 |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
