Ultrapolymers
Продукти
Технології
Ринки
Послуги
Вчіться разом з нами
Sustainability
Навіщо реєструватися?

Продукти
Технології
Ринки
Послуги
Вчіться разом з нами
Sustainability
Навіщо реєструватися?

Ukraine / Українська
Мій рахунок

Ultem
Головна

Ultem

Інформація про бренд

The ULTEM™ resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance.
Benefits-
LONG-TERM HEAT RESISTANCE
Excellent stability of physical and mechanical properties at elevated temperatures thanks to high glass transition temperature of 217 °C. Available with relative thermal indices (RTI) up to 180 °C
STRENGTH AND STIFFNESS
Outstanding strength and amorphous thermoplastic among the available alternatives, with predictable stiffness and strength up to 200 °C. Unfilled, transparent grades are equal in strength to other thermoplastics with opacifying fillers.
DIMENSIONAL STABILITY
Among the most dimensionally stable thermoplastics available, offering predictability over a wide temperature range. Filled grades offer exceptionally high-tolerance dimensional capabilities.
ENVIRONMENTAL STRESS & CRACKING RESISTANCE
Unlike most other amorphous thermoplastics, ULTEM resins retain strength and resist stress cracking when exposed to automotive and aircraft fluids, aliphatic hydrocarbons, alcohols, acids, and weak aqueous solutions.
FLAMMABILITY, SMOKE GENERATION AND TOXICITY
Inherent flame resistance without additives in most grades - exceptionally difficult to ignite, with a limiting oxygen index (LOI) of 47%, meeting UL94 V0 specifications in sections as thin as 0.41 mm. Generates extremely low smoke per the NBS smoke evolution test, with products of combustion no more toxic than those of wood.
PROCESSABILITY
Can be extruded, thermoformed, extrusion blow molded and injection molded, and flowability permits long flow lengths down to 0.2mm thick using conventional injection molding equipment.
SUSTAINABILITY
A portfolio of ISCC+ certified renewable bio-based ULTEM™ resins offers sustainability benefits while delivering exactly the same high performance and processability as incumbent ULTEM materials. Using a mass balance approach, for every 100 kg of ULTEM resin produced, SABIC replaces 25.5 kg of fossil-based feedstocks with bio-based materials derived from waste or residue, such as crude tall oil from the wood industry.

Виробники: Sabic High Performance Plastics (SHPP)Група полімерів: PEIГрупа/тип(и) полімерів: PEI

Доступно в

Belgium, Netherlands, South Africa, Ireland, Luxembourg.

Ultem продукти

121 товарів, знайдених на Ultem
Ultem 1110F
Ultem 1110FSabic High Performance Plastics (SHPP)
PEI Лиття під тиском
ECO Compliant
Food Contact Acceptable
Ultem 2310
Ultem 2310Sabic High Performance Plastics (SHPP)
PEI | 30 Glass FiberЛиття під тиском, Інше, Екструзія (не визначено), Екструзія профілю, Екструзія листів
ECO Compliant
Flame Retardant
Flow, Good
+7
Ultem 1010
Ultem 1010Sabic High Performance Plastics (SHPP)
PEI Лиття під тиском, Компаундування, Інше, Екструзія (не визначено), Екструзійно-видувне формування, Екструзія спінених виробів, Екструзія профілю
Amorphous
Chemical Resistant
Flame Retardant
+8
Ultem 2210
Ultem 2210Sabic High Performance Plastics (SHPP)
PEI | 20 Glass FiberЛиття під тиском
Amorphous
Chemical Resistant
Creep Resistant
+7
Ultem 9075
Ultem 9075Sabic High Performance Plastics (SHPP)
PEI Лиття під тиском, Екструзія профілю
ECO Compliant
Smoke Emission, Low
Toxicity, Low
+10
Ultem 2300F
Ultem 2300FSabic High Performance Plastics (SHPP)
PEI | 30 Glass FiberІнше, Екструзія (не визначено), Лиття під тиском, Екструзія профілю, Екструзія листів
Amorphous
Chemical Resistant
Creep Resistant
+6
Ultem 1000
Ultem 1000Sabic High Performance Plastics (SHPP)
PEI Лиття під тиском, Компаундування, Інше, Екструзія (не визначено), Екструзійно-видувне формування, Екструзія спінених виробів, Екструзія профілю
Amorphous
Chemical Resistant
Flame Retardant
+8
Ultem 1010F
Ultem 1010FSabic High Performance Plastics (SHPP)
PEI Екструзія (не визначено), Екструзійно-видувне формування, Екструзія спінених виробів, Лиття під тиском, Екструзія профілю, Компаундування, Інше
Amorphous
Chemical Resistant
Creep Resistant
+7
Ultem 9085
Ultem 9085Sabic High Performance Plastics (SHPP)
PEI Лиття під тиском, Екструзія профілю, Екструзія листів, Термоформування
Amorphous
Chemical Resistant
Creep Resistant
+6
Ultem 2100
Ultem 2100Sabic High Performance Plastics (SHPP)
PEI | 10 Glass FiberЛиття під тиском
Adhesion, Good
Dimensional Stability, Good
Thermal Stability, Good
+7
Ultem 1000F
Ultem 1000FSabic High Performance Plastics (SHPP)
PEI Компаундування, Інше, Екструзія (не визначено), Екструзійно-видувне формування, Екструзія спінених виробів, Лиття під тиском, Екструзія профілю
Amorphous
Chemical Resistant
Creep Resistant
+7
Ultem 2110
Ultem 2110Sabic High Performance Plastics (SHPP)
PEI | 10 Glass FiberЛиття під тиском
Flow, Good
Thermal Stability, Good
Heat Resistance, High
+7
...
...

Documents

0
0 знайдено документів
Ultrapolymers
Information
ПродуктиПро насРинкиТехнологіїКонтакти
Helpful Links
ПослугиУмови використанняПолітика конфіденційностіПолітика щодо файлів cookieНалаштування файлів cookie
Ultrapolymers LLC
+38 (044) 492.16.46

Office 43 9/2 Chervonoarmijska (V. Vasylkivska) St. 

01004 Kiev 

Ukraine

up-ukraine@ultrapolymers.kiev.ua

Ravago
Ultrapolymers. Всі права захищені. Член групи компаній Ravago Group