Noryl NHP5054
O tem materialu
NORYL NHP5054 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 0.75mm for thin-wall molding capability. NORYL NHP5054 is based on a unique co-polymer technology and exhibits good dimensional stability, high heat resistance, strong electrical performance, and very low specific gravity. It is an excellent candidate for electrical vehicle (EV) battery housings, automotive under-the-hood enclosures and components where thin-wall FR, modulus retention, and high heat resistance are required.
Blagovna znamka: NorylProizvajalec: Sabic High Performance Plastics (SHPP)Tip polimera: PPEPolnilo: 20% Glass FiberOblika: Granules
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialNoryl NHP5054
Technical properties
| Gostota (g/cm³) | 1.30 1.27 |
| Hitrost pretoka taline (g/10 min) | 8.0(250°C/10.0 kg) |
| Razred gorljivosti | V-0(> 0.75 mm) |
| Notched Izod Impct ASTM 256 (J/m) | 100(23°C) |
| Notched Izod Impct ISO 180 (kJ/m²) | - |
