Noryl WM330G
O tem materialu
NORYL WM330G resin is a 30% glass fiber reinforced blend of impact modified polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61, ACS, WRAS, KTW, and W270 listing for global potable water use for specific colors is available. NORYL WM330G resin exhibits good fatigue performance, excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves.
Blagovna znamka: NorylProizvajalec: Sabic High Performance Plastics (SHPP)Tip polimera: PPEPolnilo: 30% Glass FiberOblika: Granules
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialNoryl WM330G
Technical properties
| Gostota (g/cm³) | 1.30 |
| Hitrost pretoka taline (g/10 min) | 30(300°C/10.0 kg) |
| Razred gorljivosti | HB(> 1.5 mm) |
| Notched Izod Impct ASTM 256 (J/m) | 85(-30°C) 110(23°C) |
| Notched Izod Impct ISO 180 (kJ/m²) | 9.0(-30°C, Type 1, Notch A) 12(23°C, Type 1, Notch A) |
