Noryl NHP6046T3
O tem materialu
NORYL NHP6046T3 resin is a 30% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 0.3mm for thin-wall molding capability. NHP6046T3 is based on a unique co-polymer technology and exhibits good dimensional stability, high heat resistance, strong electrical performance and very low specific gravity. Target application is Electric Vehicle (EV) battery internal parts and electric components.
Blagovna znamka: NorylProizvajalec: Sabic High Performance Plastics (SHPP)Tip polimera: PPEPolnilo: 30% Glass FiberOblika: Unknown
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialNoryl NHP6046T3
Technical properties
| Gostota (g/cm³) | 1.37 |
| Hitrost pretoka taline (g/10 min) | 15(280°C/5.0 kg) 44(300°C/5.0 kg) |
| Razred gorljivosti | V-0(> 0.30 mm) 5VA(> 2.0 mm) |
| Notched Izod Impct ASTM 256 (J/m) | 89(-30°C) 120(23°C) |
| Notched Izod Impct ISO 180 (kJ/m²) | 10(-30°C, Type 1, Notch A) 11(23°C, Type 1, Notch A) |
