Noryl NHP7020T3
O tem materialu
NORYL NHP7020T3 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for ultra-thin-wall FR. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries UL94 flame rating of V0 at 0.3mm. NORYL NHP7020T3 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and low specific gravity. This grade is targeted for electrical vehicle (EV) battery modules, bus bar insulation layer and other high voltage electric component. See NHP8010VT3 resin for higher heat version.
Blagovna znamka: NorylProizvajalec: Sabic High Performance Plastics (SHPP)Tip polimera: PPEPolnilo: Brez polnilaOblika: Unknown
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialNoryl NHP7020T3
Technical properties
| Gostota (g/cm³) | 1.09 |
| Hitrost pretoka taline (g/10 min) | 26(300°C/5.0 kg) |
| Razred gorljivosti | V-0(> 0.30 mm) |
| Notched Izod Impct ASTM 256 (J/m) | 100(-30°C) 380(23°C) |
| Notched Izod Impct ISO 180 (kJ/m²) | 11(-30°C, Type 1, Notch A) 38(23°C, Type 1, Notch A) |
