Noryl LPN170HG
O tem materialu
NORYL LPN170HG resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for high heat resistance, low density, high gloss, low outgassing and good dimensional stability performance. This extrusion and injection moldable grade carries HDT 170°C, special gravity 1.07 g/cm3. This grade is capable for physical vapor deposition with good light distribution and high reflection rate. LPN170HG is targeted for automotive headlamp reflector, bezel, trim, light shielding and other high surface quality / high heat resistance demanded components.
Blagovna znamka: NorylProizvajalec: Sabic High Performance Plastics (SHPP)Tip polimera: PPEPolnilo: Brez polnilaOblika: Unknown
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialNoryl LPN170HG
Technical properties
| Gostota (g/cm³) | 1.07 |
| Hitrost pretoka taline (g/10 min) | 8.7(300°C/5.0 kg) |
| Razred gorljivosti | - |
| Notched Izod Impct ASTM 256 (J/m) | 30(23°C) 35(-40°C) |
| Notched Izod Impct ISO 180 (kJ/m²) | 4.3(23°C, Type 1, Notch A) 4.3(-40°C, Type 1, Notch A) |
