Noryl NHP6012
O tem materialu
NORYL NHP6012 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a CTI 2 and UL94 flame rating of V0 at 1.5mm for thin-wall molding capability. NORYL NHP6012 is based on a unique co-polymer technology and exhibits high flow, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. This material is an excellent candidate for appliance internals, indoor and outdoor electrical and electrical vehicle (EV) battery modules/housings.
Blagovna znamka: NorylProizvajalec: Sabic High Performance Plastics (SHPP)Tip polimera: PPEPolnilo: 10% Glass FiberOblika: Unknown
Značilnosti
Trgi
Tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Če si želite ogledati svoje ponudbe in pogodbe o odpoklicu, se prijavite.
Izberite barvo
MaterialNoryl NHP6012
Technical properties
| Gostota (g/cm³) | 1.19 1.19 |
| Hitrost pretoka taline (g/10 min) | - |
| Razred gorljivosti | V-1(> 1.0 mm) V-0(> 1.5 mm) 5VB(> 2.5 mm) 5VA(> 2.5 mm) |
| Notched Izod Impct ASTM 256 (J/m) | 60(-30°C) 70(23°C) |
| Notched Izod Impct ISO 180 (kJ/m²) | 6.0(23°C, Type 1, Notch A) 6.0(-30°C, Type 1, Notch A) |
