Duracon M90-57
O tomto výrobku
Duracon M90-57 is a medium viscosity (MFR 9) POM Co-polymer for general injection moulding.
- 57 series suitable for food & potable water applications.
- WRAS up to 85C
- Available in natural WK2001
- 57 series are 'new' generation materials which requires less stabilisers during manufacture (allowing food compliance and lower emissions)
NOTE: If customer is self-colouring using acid based pigments -44 series may be more suitable than -57 series (-44 series uses more stabilisers)
Obchodná značka: DuraconVýrobca: PolyplasticsTyp polyméru: POM COPOPlnivo: NeplnenéFormulár: Granules
Funkcie
Copolymer
Creep Resistant
Dimensional Stability, Good
Drinking Water Contact Acceptable
Fatigue Resistant
Food Contact Acceptable
Friction, Low
Fuel Resistant
Wear Resistant
Trhy
Technológie
Špecifikácie
Neboli nájdené žiadne záznamy o tomto materiáli
Požiadať o cenovú ponuku
Ak chcete zobraziť svoje cenové ponuky a rámcové objednávky, prihláste sa.
Vyberte farbu
ProductDuracon M90-57
Technical properties
| Density (g/cm³) | 1.41 ISO 1183 |
| Flow Rate (g/10 min) | 9.0(190°C/2.16 kg) ISO 1133 |
| Flame Rating | HB UL 94 |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
