Sconablend 50 X 194

Sconablend TPE 50 X 194 is a compound for thermoplastic processing with rubber - like properties.
Sconablend TPE 50 X 194 provides a number of outstanding physical properties:
 high elasticity, flexural and tensile strength
 low density
 good flexibility at low temperatures and ageing properties
 reuse of in-plant waste without difficulties
 excellent processing properties
Properties / Application
With its special range of properties, Sconablend TPE 50 X 194 can be used for applications where a good
compression set at higher temperatures is needed.
Processing
Sconablend TPE 50 X 194 can be processed by injection-moulding and extrusion.
Injection-moulding melt temperatures ranging from 180°C to 240°C and mould temperatures ranging from 30°C
to 50°C are recommended.
The injection rate should be as high as possible.
The extrusion of Sconablend TPE 50 X 194 requires melt temperatures between 160°C and 190°C.

Sconablend TPE 50 X 194 is not hygroscopic and therefore drying is not necessary if the material is stored
properly.