High Density Polyethylene - Milk blow moulding resin
ELTEX ® MMPE3940/10 is a masterbatch pigmented with carbon black and manufactured from ELTEX ® high-density polyethylene base.
It is mainly used for the pigmentation of the middle layer of high density polyethylene co-extruded bottles intended for the packaging of UHT or sterilized milk.
It complies with the main European food regulations governing the packaging of food products on condition however it is used at less than 5 %.
Non sono disponibili tecnologie per questo prodotto.
Non ci sono specifiche per questo prodotto
| Densità (g/cm³) | 1.50 1.50 |
| Portata (g/10 min) | 5.0(190°C/10.0 kg) |
| Valutazione della fiamma | - |
| Impatto Izod dentellato ASTM 256 (J/m) | - |
| Impatto Izod dentellato ISO 180 (kJ/m²) | - |
c/o Ultrapolymers
Nordic AB Box 5243
SE-402 24 Gothenburg
