Noryl WM330G
Acerca de este producto
NORYL WM330G resin is a 30% glass fiber reinforced blend of impact modified polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61, ACS, WRAS, KTW, and W270 listing for global potable water use for specific colors is available. NORYL WM330G resin exhibits good fatigue performance, excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves.
Marca: NorylProductor: Sabic High Performance Plastics (SHPP)Tipo de polímero: PPECarga: 30% Glass FiberFormulario: Granules
Características
Mercados
Tecnologías
Especificaciones
No se enumeran especificaciones para este producto.
Solicitar cotización
Para ver tus propuestas y acuerdos de call off, inicia sesión.
Seleccionar color
ProductNoryl WM330G
Technical properties
| Densidad (g/cm³) | 1.30 |
| Caudal (g/10 min) | 30(300°C/10.0 kg) |
| Grado de inflamabilidad | HB(> 1.5 mm) |
| Impacto Izod entallado ASTM 256 (J/m) | 85(-30°C) 110(23°C) |
| Impacto Izod entallado ISO 180 (kJ/m²) | 9.0(-30°C, Type 1, Notch A) 12(23°C, Type 1, Notch A) |
