Noryl NHP8010T3
Acerca de este producto
NORYL NHP8010T3 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for high heat resistance and ultra-thin-wall FR. This extrusion and injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries UL94 flame rating of V0 at 0.3mm. NORYL NHP8010T3 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and low specific gravity. This grade is targeted for electrical vehicle (EV) battery pack insulation sheet/film, bus bar insulation layer and other high voltage electric component. See NHP8000VT3 resin for V0 at 0.25mm and CTI 600V/PLC 0 version.
Características
Mercados
Tecnologías
Especificaciones
No se enumeran especificaciones para este producto.
Solicitar cotización
Technical properties
| Densidad (g/cm³) | 1.09 |
| Caudal (g/10 min) | 16(300°C/5.0 kg) |
| Grado de inflamabilidad | V-0(> 0.30 mm) |
| Impacto Izod entallado ASTM 256 (J/m) | 100(-40°C) 330(23°C) |
| Impacto Izod entallado ISO 180 (kJ/m²) | 11(-40°C, Type 1, Notch A) 25(23°C, Type 1, Notch A) |
