Noryl NHP6012
Acerca de este producto
NORYL NHP6012 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a CTI 2 and UL94 flame rating of V0 at 1.5mm for thin-wall molding capability. NORYL NHP6012 is based on a unique co-polymer technology and exhibits high flow, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. This material is an excellent candidate for appliance internals, indoor and outdoor electrical and electrical vehicle (EV) battery modules/housings.
Marca: NorylProductor: Sabic High Performance Plastics (SHPP)Tipo de polímero: PPECarga: 10% Glass FiberFormulario: Unknown
Características
Mercados
Tecnologías
Especificaciones
No se enumeran especificaciones para este producto.
Solicitar cotización
Para ver tus propuestas y acuerdos de call off, inicia sesión.
Seleccionar color
ProductNoryl NHP6012
Technical properties
| Densidad (g/cm³) | 1.19 1.19 |
| Caudal (g/10 min) | - |
| Grado de inflamabilidad | V-1(> 1.0 mm) V-0(> 1.5 mm) 5VB(> 2.5 mm) 5VA(> 2.5 mm) |
| Impacto Izod entallado ASTM 256 (J/m) | 60(-30°C) 70(23°C) |
| Impacto Izod entallado ISO 180 (kJ/m²) | 6.0(23°C, Type 1, Notch A) 6.0(-30°C, Type 1, Notch A) |
