Noryl WM330G
O tomto produktu
NORYL WM330G resin is a 30% glass fiber reinforced blend of impact modified polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61, ACS, WRAS, KTW, and W270 listing for global potable water use for specific colors is available. NORYL WM330G resin exhibits good fatigue performance, excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves.
Značka: NorylVýrobce: Sabic High Performance Plastics (SHPP)Typ polymeru: PPEPlnivo: 30% Glass FiberForma: Granules
Vlastnosti
Amorphous
Corrosion Resistant
Dimensional Stability, Good
Food Contact Acceptable
Hydrolytically Stable
Moisture Absorption, Low
Stiffness, High
Strength, High
Trhy
Technologie
Specifikace
Pro tento materiál nejsou uvedeny žádné specifikace
Žádost o cenovou nabídku
Chcete-li si prohlédnout své nabídky a objednávky, přihlaste se.
Zvolte barvu
ProductNoryl WM330G
Technical properties
| Density (g/cm³) | 1.30 ISO 1183 |
| Flow Rate (g/10 min) | 30(300°C/10.0 kg) ASTM D1238 |
| Flame Rating | HB(> 1.5 mm) UL 94 |
| Notched Izod Impact Strength (kJ/m²) | 9.0(-30°C, Type 1, Notch A) ISO 180 12(23°C, Type 1, Notch A) |
| Notched Izod Impact (J/m) | 85(-30°C) ASTM D256 110(23°C) |
