Noryl NHP7020T3
O tomto produktu
NORYL NHP7020T3 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for ultra-thin-wall FR. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries UL94 flame rating of V0 at 0.3mm. NORYL NHP7020T3 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and low specific gravity. This grade is targeted for electrical vehicle (EV) battery modules, bus bar insulation layer and other high voltage electric component. See NHP8010VT3 resin for higher heat version.
Značka: NorylVýrobce: Sabic High Performance Plastics (SHPP)Typ polymeru: PPEPlnivo: Bez plnivaForma: Unknown
Vlastnosti
Trhy
Technologie
Specifikace
Pro tento materiál nejsou uvedeny žádné specifikace
Žádost o cenovou nabídku
Chcete-li si prohlédnout své nabídky a objednávky, přihlaste se.
Zvolte barvu
ProductNoryl NHP7020T3
Technical properties
| Hustota (g/cm³) | 1.09 |
| Průtoková rychlost (g/10 min) | 26(300°C/5.0 kg) |
| Třída hořlavosti | V-0(> 0.30 mm) |
| Izodův rázový test s vrubem ASTM 256 (J/m) | 100(-30°C) 380(23°C) |
| Izodův rázový test s vrubem ISO 180 (kJ/m²) | 11(-30°C, Type 1, Notch A) 38(23°C, Type 1, Notch A) |
