Noryl NHP8010T3
За този продукт
NORYL NHP8010T3 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for high heat resistance and ultra-thin-wall FR. This extrusion and injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries UL94 flame rating of V0 at 0.3mm. NORYL NHP8010T3 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and low specific gravity. This grade is targeted for electrical vehicle (EV) battery pack insulation sheet/film, bus bar insulation layer and other high voltage electric component. See NHP8000VT3 resin for V0 at 0.25mm and CTI 600V/PLC 0 version.
Характеристики
Пазари
Технологии
Спецификации
Не са посочени спецификации за този продукт
Заявка за оферта
Technical properties
| Плътност (g/cm³) | 1.09 |
| Течливост (g/10 min) | 16(300°C/5.0 kg) |
| Оценка на пламъка | V-0(> 0.30 mm) |
| Ударна якост по Izod с прорез ASTM 256 (J/m) | 100(-40°C) 330(23°C) |
| Ударна якост по Izod с прорез ISO 180 (kJ/m²) | 11(-40°C, Type 1, Notch A) 25(23°C, Type 1, Notch A) |
