Noryl NHP6012
За този продукт
NORYL NHP6012 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a CTI 2 and UL94 flame rating of V0 at 1.5mm for thin-wall molding capability. NORYL NHP6012 is based on a unique co-polymer technology and exhibits high flow, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. This material is an excellent candidate for appliance internals, indoor and outdoor electrical and electrical vehicle (EV) battery modules/housings.
Марка: NorylПроизводител: Sabic High Performance Plastics (SHPP)Тип полимер: PPEПълнител: 10% Glass FiberФормуляр: Unknown
Характеристики
Пазари
Технологии
Спецификации
Не са посочени спецификации за този продукт
Заявка за оферта
За да видите вашите оферти и поръчки "при поискване", моля, влезте в системата.
Изберете цвят
ProductNoryl NHP6012
Technical properties
| Плътност (g/cm³) | 1.19 1.19 |
| Течливост (g/10 min) | - |
| Оценка на пламъка | V-1(> 1.0 mm) V-0(> 1.5 mm) 5VB(> 2.5 mm) 5VA(> 2.5 mm) |
| Ударна якост по Izod с прорез ASTM 256 (J/m) | 60(-30°C) 70(23°C) |
| Ударна якост по Izod с прорез ISO 180 (kJ/m²) | 6.0(23°C, Type 1, Notch A) 6.0(-30°C, Type 1, Notch A) |
