High Density Polyethylene - Milk blow moulding resin
ELTEX ® MMPE3940/10 is a masterbatch pigmented with carbon black and manufactured from ELTEX ® high-density polyethylene base.
It is mainly used for the pigmentation of the middle layer of high density polyethylene co-extruded bottles intended for the packaging of UHT or sterilized milk.
It complies with the main European food regulations governing the packaging of food products on condition however it is used at less than 5 %.
Няма налични технологии за този продукт.
Не са посочени спецификации за този продукт
| Плътност (g/cm³) | 1.50 1.50 |
| Течливост (g/10 min) | 5.0(190°C/10.0 kg) |
| Оценка на пламъка | - |
| Ударна якост по Izod с прорез ASTM 256 (J/m) | - |
| Ударна якост по Izod с прорез ISO 180 (kJ/m²) | - |
