Purell HP570P is a polypropylene homopolymer for use in injection moulding applications
Purell HP570P exhibits a good flow properties combined with a high stiffness. It can also be sterilised by autoclave and ethylene oxide methods.
Purell HP570P is extensively applied in medical device components, labware and closures. Additionally it is used in general injection moulding thin-walled warpage-critical applications.
Не са посочени спецификации за този продукт
| Плътност (g/cm³) | 0.900 |
| Течливост (g/10 min) | 16(230°C/2.16 kg) |
| Оценка на пламъка | - |
| Ударна якост по Izod с прорез ASTM 256 (J/m) | - |
| Ударна якост по Izod с прорез ISO 180 (kJ/m²) | - |
c/o Ultrapolymers
Nordic AB Box 5243
SE-402 24 Gothenburg
