Technyl SAFE A 219WFC V50
За този продукт
*Previously TECHNYL A 218W V50 BLACK FA
TECHNYL SAFE A 219WFC V50 BK is a polyamide 66, 50% glass fibre reinforced, heat stabilized with organic stabiliser for injection moulding. Designed to offer an improved hydrolisis resistance and chlorine resistance vs standard PA66, for cold, warm and hot temperature in domestic and industrial water management components including, but not limited to components in contact with drinking water where elevated levels of chlorine could be present.
Характеристики
Dimensional Stability, Good
Drinking Water Contact Acceptable
Food Contact Acceptable
Heat Stabilized
Hydrolysis Resistant
Hydrolytically Stable
Stiffness, High
Пазари
Технологии
Спецификации
Не са посочени спецификации за този продукт
Заявка за оферта
За да видите вашите оферти и поръчки "при поискване", моля, влезте в системата.
Изберете цвят
ProductTechnyl SAFE A 219WFC V50
Technical properties
| Density (g/cm³) | 1.55 ISO 1183 |
| Flow Rate (g/10 min) | - |
| Flame Rating | HB(0.75 mm) UL 94 HB(1.5 mm) HB(3.0 mm) |
| Notched Izod Impact Strength (kJ/m²) | 14(23°C, Type 1, Notch A) ISO 180 |
| Notched Izod Impact (J/m) | - |
