Trirex 3020U(17)
За този продукт
TRIREX 3020U (17) is a high flow UV stabilised general purpose polycarbonate (MFR 36) which allows it to be widely used in many applications and industry segments and ideal for use in parts with long and thin flow lengths.
Note: this PC has a lower molecular weight (higher flowing) which can make it more brittle compared to medium flowing PC grades.
CHARACTERISTICS
- Good flow-ability
- Workable under a wide range of temperatures (-100°C ~ 135°C)
- High electrical performance
- Good dimensional stability
- Low moisture absorbency
- Good weather resistance
- FDA Approved
APPLICATIONS
- TRIREX 3020U(17) resin grade is used for Injection molding products. UV stabilized.
- Ultra low viscosity. Transparent colors only.
Характеристики
Пазари
Технологии
Спецификации
Не са посочени спецификации за този продукт
Заявка за оферта
За да видите вашите оферти и поръчки "при поискване", моля, влезте в системата.
Изберете цвят
ProductTrirex 3020U(17)
Technical properties
| Density (g/cm³) | 1.20 |
| Flow Rate (g/10 min) | 36(300°C/1.2 kg) |
| Flame Rating | V-2(1.6 mm) |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | 740(23°C, 3.18 mm) |
