Ultrapolymers
Продукти
Технологии
Пазари
Услуги
Учете с нас
Sustainability
Защо да се регистрирате?

Продукти
Технологии
Пазари
Услуги
Учете с нас
Sustainability
Защо да се регистрирате?

Bulgaria / Български Език
Моят акаунт

Ultem
Начало

Ultem

Информация за марката

The ULTEM™ resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance.
Benefits-
LONG-TERM HEAT RESISTANCE
Excellent stability of physical and mechanical properties at elevated temperatures thanks to high glass transition temperature of 217 °C. Available with relative thermal indices (RTI) up to 180 °C
STRENGTH AND STIFFNESS
Outstanding strength and amorphous thermoplastic among the available alternatives, with predictable stiffness and strength up to 200 °C. Unfilled, transparent grades are equal in strength to other thermoplastics with opacifying fillers.
DIMENSIONAL STABILITY
Among the most dimensionally stable thermoplastics available, offering predictability over a wide temperature range. Filled grades offer exceptionally high-tolerance dimensional capabilities.
ENVIRONMENTAL STRESS & CRACKING RESISTANCE
Unlike most other amorphous thermoplastics, ULTEM resins retain strength and resist stress cracking when exposed to automotive and aircraft fluids, aliphatic hydrocarbons, alcohols, acids, and weak aqueous solutions.
FLAMMABILITY, SMOKE GENERATION AND TOXICITY
Inherent flame resistance without additives in most grades - exceptionally difficult to ignite, with a limiting oxygen index (LOI) of 47%, meeting UL94 V0 specifications in sections as thin as 0.41 mm. Generates extremely low smoke per the NBS smoke evolution test, with products of combustion no more toxic than those of wood.
PROCESSABILITY
Can be extruded, thermoformed, extrusion blow molded and injection molded, and flowability permits long flow lengths down to 0.2mm thick using conventional injection molding equipment.
SUSTAINABILITY
A portfolio of ISCC+ certified renewable bio-based ULTEM™ resins offers sustainability benefits while delivering exactly the same high performance and processability as incumbent ULTEM materials. Using a mass balance approach, for every 100 kg of ULTEM resin produced, SABIC replaces 25.5 kg of fossil-based feedstocks with bio-based materials derived from waste or residue, such as crude tall oil from the wood industry.

Производители: Sabic High Performance Plastics (SHPP)Полимерна група: PEIПолимерна група/тип(и): PEI

Предлага се в

Belgium, Netherlands, South Africa, Ireland, Luxembourg

Ultem продукти

121 продукт(и), намерен(и) в Ultem
Ultem 1110F
Ultem 1110FSabic High Performance Plastics (SHPP)
PEI Шприцване
ECO Compliant
Food Contact Acceptable
Ultem 2310
Ultem 2310Sabic High Performance Plastics (SHPP)
PEI | 30 Glass FiberШприцване, Други, Екструдиране (неопределено), Екструдиран профил, Екструзия на листове
ECO Compliant
Flame Retardant
Flow, Good
+7
Ultem 1010
Ultem 1010Sabic High Performance Plastics (SHPP)
PEI Шприцване, Компаундиране, Други, Екструдиране (неопределено), Издуване, Екструдирана пяна, Екструдиран профил
Amorphous
Chemical Resistant
Flame Retardant
+8
Ultem 2210
Ultem 2210Sabic High Performance Plastics (SHPP)
PEI | 20 Glass FiberШприцване
Amorphous
Chemical Resistant
Creep Resistant
+7
Ultem 9075
Ultem 9075Sabic High Performance Plastics (SHPP)
PEI Шприцване, Екструдиран профил
ECO Compliant
Smoke Emission, Low
Toxicity, Low
+10
Ultem 2300F
Ultem 2300FSabic High Performance Plastics (SHPP)
PEI | 30 Glass FiberДруги, Екструдиране (неопределено), Шприцване, Екструдиран профил, Екструзия на листове
Amorphous
Chemical Resistant
Creep Resistant
+6
Ultem 1000
Ultem 1000Sabic High Performance Plastics (SHPP)
PEI Шприцване, Компаундиране, Други, Екструдиране (неопределено), Издуване, Екструдирана пяна, Екструдиран профил
Amorphous
Chemical Resistant
Flame Retardant
+8
Ultem 1010F
Ultem 1010FSabic High Performance Plastics (SHPP)
PEI Екструдиране (неопределено), Издуване, Екструдирана пяна, Шприцване, Екструдиран профил, Компаундиране, Други
Amorphous
Chemical Resistant
Creep Resistant
+7
Ultem 9085
Ultem 9085Sabic High Performance Plastics (SHPP)
PEI Шприцване, Екструдиран профил, Екструзия на листове, Термоформоване
Amorphous
Chemical Resistant
Creep Resistant
+6
Ultem 2100
Ultem 2100Sabic High Performance Plastics (SHPP)
PEI | 10 Glass FiberШприцване
Adhesion, Good
Dimensional Stability, Good
Thermal Stability, Good
+7
Ultem 1000F
Ultem 1000FSabic High Performance Plastics (SHPP)
PEI Компаундиране, Други, Екструдиране (неопределено), Издуване, Екструдирана пяна, Шприцване, Екструдиран профил
Amorphous
Chemical Resistant
Creep Resistant
+7
Ultem 2110
Ultem 2110Sabic High Performance Plastics (SHPP)
PEI | 10 Glass FiberШприцване
Flow, Good
Thermal Stability, Good
Heat Resistance, High
+7
...
...

Documents

0
0 намерени документи
Ultrapolymers
Information
ПродуктиКорпоративниПазариТехнологииКонтакт
Helpful Links
УслугиУсловия за ползванеПолитика за поверителностПолитика за бисквиткиПредпочитания за бисквитките
Ultrapolymers Group Bulgaria Ltd
+359 (2) 885 02 21

12, Obelsko Shosse str. Orkikem Building 

1360 Sofia

Bulgaria

ask.bg@ultrapolymers.com

Ravago
Ultrapolymers. Всички права запазени. Член на Ravago Group